General Chemicals Corp 12336 Emerson Dr.Brighton
Michigan (MI) 48116, USA USA: 855-475-5600 Overseas: 248-587-5600 Fax: 248-587-5606 Email: firstname.lastname@example.org
Metal Forming lubricants For Aluminum , Copper & Brass
Choosing the proper metal forming lubricant and metal stamping for non ferrous metals such as Aluminum, copper brass has become a difficult, complicated decision. Factors that influence choosing the right lubricant are: type of alloy, severity of the metal forming operation, metal stamping, application method and subsequent operations. General Chemical Corp. is an expert at solving metal forming or metal stamping problems. For a Aluminum lubricant or copper brass lubricant recommendation contact General Chemical; a proven world class leader in Aluminum lubricants, Motor oil, Synthetic Lubricants and copper brass lubricants. General Chemical offers a complete line of Aluminum lubricants and copper brass lubricants. The product line discussed below is design to handle the most stamping and deep drawing operations; however General Chemical can formulate lubricants to meet special requirements. These Aluminum lubricants and copper brass lubricants are available in 5 gallon pails, 55 gallon drums and 300 gallon totes.
Extra Heavy duty Synthetic lubricant For deep drawing, stamping, blanking, tube forming, roll forming.
Metals: Stainless steel, steel, aluminum, copper brass.Solvent: Synthetic Dilution: Dilute with water
Soluble oil based stamping and drawing lubricants provide the lubricity of oil and oil soluble lubricity additives with cooling effect of water. These products permit faster press rates; insure dimensional accuracy, and promote excellent surface finish.
Rolube 6001: Soluble oil concentrate used for hot and cold rolling of copper and brass. Non-staining, anneals clean. Use dilution 1:10 to 1:20
Gendraw3860: a heavy duty soluble oil concentrate, contains extreme pressure lubricity additives. Safe for all metals except titanium. Use dilutions 1to3 to 1:25
Genlube6001: Light to medium duty soluble oil concentrates for use on ferrous and nonferrous metals. Non-staining contains polar and boundary lubricants. Use dilutions 1:3 to 1:20
Genlube3250: heavy duty soluble oil concentrate for forming ferrous metals. Contains a passive extreme pressure lubricity additive. Use dilutions 1:3 to 1:25